ReplicatorG Firmware Upgade auf der Konsole

kuddel@apollo ~ $ /home/kuddel/Lokal/replicatorg-0040/tools/avrdude -C/home/kuddel/Lokal/replicatorg-0040/tools/avrdude.conf -cstk500v1 -P/dev/ttyACM1 -b57600 -D -Uflash:w:/home/kuddel/.replicatorg/firmware/mighty_one_v7.2.0.hex:i -pm1280
avrdude: AVR device initialized and ready to accept instructions
Reading | ################################################## | 100% 0.00s
avrdude: Device signature = 0x1e9703
avrdude: reading input file "/home/kuddel/.replicatorg/firmware/mighty_one_v7.2.0.hex"
avrdude: writing flash (117632 bytes):
Writing | ################################################## | 100% 28.24s
avrdude: 117632 bytes of flash written
avrdude: verifying flash memory against /home/kuddel/.replicatorg/firmware/mighty_one_v7.2.0.hex:
avrdude: load data flash data from input file /home/kuddel/.replicatorg/firmware/mighty_one_v7.2.0.hex:
avrdude: input file /home/kuddel/.replicatorg/firmware/mighty_one_v7.2.0.hex contains 117632 bytes
avrdude: reading on-chip flash data:
Reading | ################################################## | 100% 24.26s
avrdude: verifying ...
avrdude: 117632 bytes of flash verified
avrdude: safemode: Fuses OK
avrdude done. Thank you.

Schreibe einen Kommentar

Deine E-Mail-Adresse wird nicht veröffentlicht. Erforderliche Felder sind mit * markiert.